WTX3 Buoyancy Cell


This single cylinder buoyancy cell can mate to the WTX Harness or directly to the back plate.

Features:
  • Gussets along each side allow for a full 34 lbs of lift without compromising the overall size of the WTX3
  • 4 slots allow it to be mounted to a WTX harness or back plate using upper and lower nylon cylinder bands
  • 2 pairs of grommets allow the WTX3 to be bolted on if a single tank adapter (STA)is used
  • A 2” (5cm) wide restriction band at the bottom of the WTX3 allows the cylinder to nestle into the inflated buoyancy cell so it doesn’t get pushed away from your body
  • A 2” (5cm) D-ring on the restrictor band is a convenient place to add accessories like a surface marker buoy
  • The airway comes off the top back center of the cell. A safety cable inside the elliptical hose prevents hyperextension of the corrugated hose
  • Features the Apeks technical inflator with brass buttons
  • Includes front, lower left pull dump
  • Constructed from durable 840-denier nylon
Specs:
Material 840D
LP Hose 27”
Airway buttons Brass
Dump valves 1, lower left
Dry weight 2.78 lbs / 1.26 kg
Video: