current: CY | change

WTX6 Buoyancy Cell

The WTX6 buoyancy cell is designed for twin cylinder use exclusively. It provides 60 lbs of lift respectively. It is rugged and built of the highest quality materials. It is built to accommodate an optional internal retraction kit (separate purchase p/n 388300).

  • These twin cylinder buoyancy cells provide 60 lbs and 85 lbs of lift respectively
  • Outer bag constructed out of 1000D Armorshield™ Cordura to resist abrasion and fading
  • Inner bag constructed from mil-spec welded fabric, the same fabric used in survival vests worn by US fighter pilots.
  • Inner bladder protected from zipper with V-diamond rubber
  • Pull dump on inside lower left
  • Optional pull dump may be added to inside lower right
  • Highly efficient drains empty water quickly after the dive
  • 3 upper grommets allow various height settings coupled with a lower slot that compensates for misaligned band bolts
  • The airway comes off the top back center of the cell. A safety cable inside the elliptical hose prevents hyperextension of the corrugated hose
  • Features the Apeks technical inflator with brass buttons
  • Accepts WTX Internal Retractor Kit part number: 388300
Material 1000D Armorshield™ Cordura®
Lift capacity 60 lbs
LP Hose 27”
Airway buttons Brass
Dump valves 1, lower left (optional dump on lower right)
Zipper #10 coil
Dry weight 3.7 lbs / 1.66 kg