Current: EG (EN) | change

WTX-D45 Buoyancy Cell

WTX-D45_front WTX-D45_back WTX-D45_side
WTX-D45_front
WTX-D45_front
WTX-D45_back
WTX-D45_back
WTX-D45_side
WTX-D45_side

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

The WTX-D twin cylinder wings are designed for twin set diving and perfectly complement the Apeks range of twin manifolds and the Tek3 regulators. Often referred to as donuts, the WTX-D wings are oval shaped air cells or bladders that are not permanently attached to a harness. Not only are these donut wings streamlined, but due to their shape being a continuous loop, they are very stable underwater. There is no dramatic shift of air from left to right.

The WTX-D60R features a redundant system made up of two inner cells in one outer bag. Either cell is capable of generating 60lbs of lift when it is full. Dive with peace of mind knowing that you’re carrying a redundant system.

The Apeks twin cylinder wings are a smart design that allows a cylinder to nest deep inside them. These wings mate up nicely to the rest of the Apeks WTX collection of high quality harnesses, plates and accessories. They can be configured in multiple ways to match the type of diving that you do. As with the rest of the WTX collection, the wings are built from the finest quality materials. They are designed by Apeks and built in our own factory.

Features:
  • Inflator:
    • K style with brass buttons
    • Low profile 16” oval-shaped hose
    • Safety cable to prevent hyper-extension
  • Dump Valves
    • Low profile flat valve
    • Positioned in front, lower-left side and rear, lower-right side
  • Tank Stabilizer Bars
  • Drains
    • 2 large drain grommets
    • Center mesh drain panel
  • The 30lb and 40lb wings are able to accept an optional Retractor Kit, P/N: 388300
  • Materials:
    • Exterior: 1000D Armorshield Cordura
    • Inner air cell: 22mil (.022) thick black urethane
      Zipper: heavy duty YKK #10 plastic zip and slide
Specs:
Style Inflator "K" Style w/ brass buttons®
Airway 16" corrugated hose w/ simple elbow
Dump valves 1 Flat Valve - lower left
Harness Can be used w/ WTX or webbed harness
Weight System Optional SureLock II
Drains Central mesh panel + 2 grommet
Retractor option Yes
Tank Stabilizer Bars No
Exterior Material 1000D Armorshield Cordura
Inner bladder 22 mil (.022) thick black urethane
Zipper Heavy Duty YKK #10
Lift Capacity (lbs/N) WTX-D45 - 45lbs
Warranty Limited Lifetime