This single cylinder buoyancy cell can mate to the WTX Harness or directly to the back plate.

Gussets along each side allow for a full 32 lbs of lift without compromising the overall size of the WTX3

4 slots allow it to be mounted to a WTX harness or back plate using and upper and lower nylon cylinder bands

2 pairs of grommets allow the WTX3 to be bolted on if a single cylinder mounting kit is used

A 2" wide restriction band at the bottom of the WTX3 allows the cylinder to nestle into the inflated buoyancy cell so it doesn't get pushed away from your body

A 2" D-ring on the restrictor band is a convenient place to add accessories like a surface marker buoy

The airway comes off the top back center of the cell. A safety cable inside the elliptical hose prevents hyperextension of the corrugated hose

Features the Apeks technical inflator with brass buttons

Includes front, lower left pull dump

Constructed from durable 840-denier nylon