Find a Dealer

current: US | change

XTX Tungsten



US$895.00

The XTX Tungsten is built upon the XTX200 platform but with a truly unique, added feature: it is protected with a hard, durable PVD (Physical Vapor Deposition) finish. This "tough as nails" finish is better than traditional chrome plating. The coating is made of high quality grades of Titanium, Zirconium and Chromium. The result is not only rich, but protects your investment from normal diving abuse.

This product qualifies for Free Parts for Life

Features:

First Stage:

  • Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth.
  • 2 HP ports and 4 MP ports are angled for optimum hose routing
  • An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out

Second Stage:

  • Pneumatically-balanced second stage results in smooth, easy breathing
  • The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used. Press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the center for the full effect of the purge, i.e. when regulator clearing etc.
  • The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
  • Easy-to-grip opening effort control knob keeps the diver in control
  • The 2nd stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mold, yeast and algae.
  • A silicone exhaust valve improves the breathing performance of the regulator
  • The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue
  • A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water
Specs:
Connections Yoke and DIN available
Type of first stage Over-balanced diaphragm design, environmentally sealed
Body Type One piece forged body
Number of HP ports 2 (7/16" UNF)
Number of MP ports 4 with 5th port option (3/8" UNF)
Environmental Dry Kit Standard
First stage exterior Physical Vapor Deposition (PVD) Coating
Orientation Convertible LH or RH
Coldwater Use Yes
Type of second stage pneumatically balanced
Opening Effort Control Knob Yes
Integrated Venturi Lever Yes
Mouthpiece Comfo-bite™
Exhaust tee Diver Changeable - comes with 2 sets
Heat Exchanger for freezing resistance Yes
Hose type Braided Flexi-hose
Overall work of breathing (WOB) scores Avg. 0.70 joules/liter
Nitrox compatible Yes to 40% O2 when new, out of the box / Can be cleaned to 100%
Video: